10.5 Rules Updated

In an effort to increase car count and mirror other 10.5 classes we have made the following rules changes.

Chassis/Suspension Front

Front suspension modifications are limited to bolt-in replacement components. Factory front frame rails must be in stock, unaltered position. Stock firewall must be retained and in stock location. Minor notching for clearance of bell housing, distributor, supercharger or intercooler permitted.

Rear Only

Stock type rear suspension or ladder bar rear suspension permitted. Aftermarket 4-links are not allowed. Stock rear frame rails required. Minor notching of outer portion of frame rails for tire clearance only permitted. Inboard section of rear frame rails must remain stock, unaltered, and in factory location. Mini-tubing permitted; no full tubs. Aftermarket anti-roll bars and coil-overs permitted. Wheelie bars are notallowed.